Sony TVs are best known for their great brightness and picture quality, and it has a feature that upscales the non-4K quality to almost 4K. This is why people prefer Sony TVs more than others.
But sometimes it shows up with different problems, and the “Sony TV blinking red light 6 times” is among users’ most common ones. If you also face the same issue, you shouldn’t worry about that. Here, I’ll take you through a few easy fixes to eliminate the problem.
How to Fix Sony TV Blinks Red Light 6 Times in 2023?
Multiple reasons can cause the Sony TV blinking red light 6 times issue, which can be annoying if you don’t know how to fix it.
You’ll be glad to know that there are many methods that you can try to eliminate this problem. I have shared the step-by-step guide below with easy explanations so that you can understand and apply them to solve the issue easily.
Restart Your TV
The easiest way to fix Sony TV blinking red light 6 times is by restarting your TV. If your TV suffers from temporary problems, then a simple restart will help eliminate them.
The steps to restart your Sony TV are easy, but in case you’re a new user and not familiar with the method, these are the steps:
- First, hold the power button on the remote for a few seconds.
- It’ll open up a new menu with the Restart option; simply click that.
Your TV will boot within a few moments, then check whether the issue is still there.
You can also restart your TV by going to the settings page, but the steps may vary on the models. However, these are the steps for most of the models:
- First, press the Home button on the remote.
- Then, select Settings from the available options.
- Now, navigate to the Device Preference option.
- Then, select About, followed by Restart.
- Finally, click Restart again to start the process.
In some models, you’ll need to go to Quick Settings > Settings > System > Restart, and you may need only to press the home button to go to the settings page.
Reset the Power Cycle Of Your TV
If your TV has been continuously running, it may cause some unwanted problems, and the Sony TV blinking red light 6 times issue too. So, it’ll be better for you to give it some time to relax.
The best way to reset the power cycle of your Sony TV is to unplug it from the power supply, wait for a few minutes and again plug it.
That’s it; the red light should stop blinking on your Sony TV, but if it doesn’t, follow the other solutions mentioned below.
Disconnect All Devices From Your Sony TV
If your Sony TV blinks red light 6 times, then that may be because of any connected devices. So, turn off your TV, unplug each, such as cables, USBs, etc., and turn on your TV again. If your TV is good, the red light should stop blinking red lights. You should try operating your TV with all the devices previously connected to it one at a time and identify the main culprit. After successfully diagnosing the device, replace it with a new one.
If it doesn’t solve the problem, then there’s surely some problem with your TV, so try following other solutions mentioned below.
ALSO READ: How to Fix Whirlpool Washer Stuck on Sensing
Update Your TV
If you’re on outdated firmware, that might trouble you with many problems, including the red light blinking issue. So, you should check for any updates and if you find anything new, upgrade it to the latest one.
Although the steps are easy, you may face problems if you’re unfamiliar with all these stuff, so to help you with that, I have added the steps below:
- First, press the Home button on your Sony TV remote.
- Then, head towards the Settings.
- Now, you’ll see any of the two options, “Product Support” or “Contact Sony” select that.
- Finally, choose the Update Software option.
Ensure your Sony TV has an active internet connection to automatically download the latest firmware if any new update is available.
In this context, you should know that old Sony TV models don’t have options to update the firmware, so if you’re using any of those devices, this option won’t apply to you. But you can try following the other solutions I’ve shared below.
Factory Reset Sony TV
If any of the above fixes don’t work, you should factory reset your Sony TV as the last solution from your end. But you should also keep in mind that this process will erase all of your data available on the TV, such as accounts, downloaded apps, preferences, etc.
Factory resetting a Sony TV is easy, and two methods are available for that:
Through Settings:
- First, press the Home button on the Sony TV remote.
- Then, select Settings from the available options.
- Now, head towards System Settings.
- Then, select Customer Support.
- Now, scroll down to the bottom and click on Factory Settings.
- Finally, it’ll ask you for confirmation; click OK to confirm.
Through Power & Home Button:
- First, unplug your TV from the power socket.
- Now, press and hold power & home button together on your remote.
- Then, plug in your TV to the power supply again.
- You’ll see the Sony logo on your screen, and the factory reset will start automatically.
Take Your Sony TV To A Service Centre
If you have tried all the solutions mentioned above and they aren’t fruitful, the backlight is probably damaged, or some other problems with the hardware. So, it’ll be better for you to take your TV to an authorized service center or consult a technician to help solve your Sony TV blinking red light problem.
ALSO READ: What is LG Super Resolution? And How to Access LG Super Resolution on TVs 2023
Conclusion
So, these were the method to fix the Sony TV blinking red light 6 times issue. All the methods are explained in simple words so you can understand them better. Hopefully, you have got rid of the problem successfully. If you have more to know, please drop your queries below.
